Shimano Dura Ace R9250 Di2 Forskifter

Shimano Dura Ace R9250 Di2 Forskifter
Vejl. udsalgspris 3 690
2 877 813 rabat
På lager (Kun 4)
  • Levering 2-3 arbejdsdage
  • Gratis levering med Track & Trace
mantel-customer-service

Stil et spørgsmål om dette produkt

E-mail vores kundeservice

Bedste Tilbud

Bedste Tilbud

Find de mest populære produkter til konkurrencedygtige priser. Uanset om du er på udkig efter dæk, en ny kæde eller andet tilbehør, giver vores Bedste Tilbud dig mulighed for at købe de bedste produkter til konkurrencedygtige priser.

Fordele og ulemper

Fordele og ulemper

  • Great shifting performance in terms of speed and shifting under load.
  • Semi-wireless so no cable between shifter and front derailleur. Easy installation and no chance of cable breakage.
  • The shifting speed of the front derailleur has increased by 45% compared to its predecessor.
  • More aerodynamic; frontal area has been reduced by 33%.

Specifikationer

Specifikationer

Mærke
 Shimano
Antal gear
12-speed
Måde at skifte gear på
Elektronisk
Montering
Svejsning
Vægt
96 gram
Farve
Sort
Hvilket gruppesæt har du?
Shimano Dura-Ace

Beskrivelse

Beskrivelse

The Shimano Dura Ace R9250 front derailleur is part of the Shimano R9200 Di2 group set. The shifting speed of the front derailleur has increased by 45% compared to the Shimano Dura Ace R9150 derailleurs. The Shimano Dura Ace Di2 R9250 front derailleur therefore shifts much faster and more efficiently than a fully wireless groupset.

The shifting speed under load is also very impressive. The Shimano Dura Ace R9250 front derailleur is more compact and lighter. The frontal area has been reduced by 33%, is 96 grams lighter and is suitable for chainrings from 50T to 54T.

Require a derailleur clamp?

Some bicycles do not have a braze on for the front derailleur. To mount this front derailleur, you can use a derailleur clamp.

Kompatibilitet

Please note! Can only be used in combination with Shimano Dura Ace R9200 and Ultegra R8100 12 speed groupset parts.

Montering

Position the front derailleur
When installing, make sure to leave a gap of about 2 mm between the outer edge of the derailleur and the largest chainring.

Adjust your derailleur
It is important to properly adjust the derailleur after mounting. This is a meticulous job, which you can read all about here.
Vis mere Vis mindre

Ofte købt sammen

Ofte købt sammen